Home

Overview of Nevermore Scorch Nevermore Scorch is an advanced air filtration media, designed for the unique demands of 3D printer chambers, especially at elevated temperatures. Traditional carbon filters become less effective above 50°C and are significantly less efficient above 60°C. Nevermore Scorch adds the heat resistance regular carbon lacks, and when mixed into carbon increases the range of VOCs that can be caught, making a carbon/scorch mix the best filtering solution for all filament/resin types. Innovative Filtration Technology This product is a zeolite-based, highly microporous adsorption medium, enhanced with potassium permanganate (KMnO4). This combination can not only bind VOCs permanently, but even transform toxins like styrene - a major VOC in ABS filaments - into harmless potassium benzoate (food additive). The process is not harmed by high chamber temps, but accelerated, making Nevermore Scorch ideal for heated 3D printer chambers! Scorch color changes from bright purple to a dullish gray as its slowly being spent, giving a perfect visual indication of when its time to swap filter media! Optimal Carbon/Scorch Ratios for Temperature Ranges Below 35°C: 90% Carbon / 10% Scorch 40°C ± 5°C: 75% Carbon / 25% Scorch 50°C ± 5°C: 50% Carbon / 50% Scorch 60°C ± 5°C: 25% Carbon / 75% Scorch Above 65°C: 100% Scorch Compatibility and Printer Safety Nevermore Scorch is steam-activated and designed to be safe for use in 3D printers, without causing damage printer metal parts. Additionally, the pellets are visually indicative of their usage: bright purple when fresh, turning grey as they react and become spent! This visual cue provides a simple and effective way to monitor the lifespan of your filtration media. Handling and Safety While Nevermore Scorch is not inherently harmful or toxic (its safe to touch by hand), it is advisable to handle with care. Avoid contact with eyes or airways, as KMnO4 will react with mucous membranes. The safety of our users is a priority, and while risks are low, they should not be overlooked. Plastic gloves will protect from accidental SCORCH residue being on your fingers when later scratching your eyes, a face/dust mask will protect from inhaling KMnO4 dust when pouring or refilling filters, and protective glasses from accidentally getting SCORCH in your eyes (it hurts!). Environmental Considerations The product, when saturated with VOCs, can be disposed of in regular waste systems. However, care should be taken to ensure unspent KMnO4 does not leach into nature – if Scorch is still bright purple, reactive KMnO4 can leech into ground water where it should not be! If your use of the product ends, unspent Scorch needs to be taken care of by waste management authorities, disposed of inside the sealed bag, or neutralized with 3% hydrogen peroxide solution.

The printed parts for the Galileo 2 Extruder. We use black ABS for printing (no ABS+ or other blends!). We include the ECAS variant and the 3 hole cable chain with thermistor mount by default. If you have other wishes, or wish other colors, please contact us before ordering! Included parts: [a]_front_bearing_holder.stl [a]_front_half_g2.stl [a]_rear_half_g2.stl cable_chain_3_hole_ct.stl cable_cover.stl front_body_ECAS_coupler.stl g2_ptfe_cutting_tool.stl idler_bearing_cover.stl printed_shim.stl rear_body.stl

G2 Extruder (G2E) is designed as a drop-in replacement for the CW2 extruder for Voron printers utilizing the Stealthburner toolhead. G2E features a custom large drive gear (16mm diameter) mated to an idler bearing to help prevent extruder artificing due to gear meshing, and because it features a planetary gearbox, there's no issue with gear-meshing noise as found on CW2. G2E is also fully compatible with all current toolhead boards available. For more information refer to the project page: https://github.com/JaredC01/Galileo2

For StealthMax Mini Operational Voltage 12V Rated Current 150mA Rated Speed 3300 RPM +-10% Air Flow 9.15cfm (16.44m³/h, 0.274m³/min) Static Pressure 0.634 inH2O (16.10 mmH2O) Acoustic Noise 36.7 dB(A)  

2 pieces M3x50 screw in Steel Black 12.9, fully threaded

Operational Voltage 5V Rated Current 160mA Rated Speed 8500 RPM +-15% Air Flow 3.0cfm (5.1m³/h, 0.085m³/min) Static Pressure 0.564 inH2O (14.33 mmH2O) Acoustic Noise 34.5 dB(A) Note: The fan wires are only about 60mm in length!

Gdstime 2510 Axial Fan, suitable for Xol. Model Number Gdt2510S12B. Dual Ball Bearing, 24V, 60mA, 12000 RPM, 2.45 cfm, 27.46dB(a), 0.24 InH2O

Gdstime 4010 Blower Fan, suitable for Xol. Model Number GDB4010. Dual Ball Bearing, 24V, 100mA, 12000 RPM, 4.17 cfm, 37dB(a), 0.72 InH2O

ZEN F695-2RS Precision Bearing for accurate fit onto the pins for the BFI mod. Manufacturer Datasheet  

Step-Down-Converter to allow operation of 12V devices on a 24V rail. Technical data: Input Voltage: 24V (min 15V max 36V) Output Voltage: 12V Operating ambient temperature range: -40°C to +85°C Output Current (max): 500mA  

1 Wire Mount Connector 5 Crimp Contacts

1 PCB Mount Connector 1 Wire Mount Connector 5 Crimp Contacts

Diameter: 6.5cm Hole spacing: 3.7cm Thickness: 2.9cm Model: BFB0712HF Voltage: DC 12V Current: 0.80A Interface: PWM four pin Bearings: double ball bearings Speed: 4800 rpm

Xol Hardware Kit (for Update 2023-09-15) Includes carriage parts, toolhead mounting hardware and optional hardware. Includes some spare screws and inserts. Note that the screws to mount the extruder are not included, as these vary depending on the specific extruder you use. The product photo shows the original Xol Kit contents, we try to update the kits as the project progresses. If you tell us which screws you need in advance, we can add these for free if we have them in stock (2 pcs). 7 Heatset Insert M2.5x3.5x4 8 Heatset Insert M2x3.5x4 17 Heatset Insert M3x5x4 3 M2.5x10 SHCS 5 M2.5x20 SHCS 3 M2x30 SHCS 2 M2x10 SHCS 9 M2x12 SHCS 3 M2x8 SHCS 5 M3 Nut 7 M3x06 BHCS 13 M3x08 SHCS 7 M3x16 SHCS 3 M3x20 SHCS 2 M3x20 Standoff 2 M3x26 Pin 2 M3x30 Pin

Operational Voltage 5V Rated Current 120mA Rated Speed 15000 RPM +-15% Air Flow 4.31cfm (7.32m³/h, 0.122m³/min) Static Pressure 0.32 inH2O (8.13 mmH2O) Acoustic Noise 31 dB(A)  

Operational Voltage 12V Rated Current 80mA Rated Speed 8500 RPM +-15% Air Flow 3.0cfm (5.1m³/h, 0.085m³/min) Static Pressure 0.564 inH2O (14.33 mmH2O) Acoustic Noise 34.5 dB(A) Note: photo shows the -A117 variant with 60mm cable, the -A variant we deliver is with ~150mm cable

For the v2.4 / Trident Front Idler Pin Mod

Price per meter. Comes uncut if multiples are ordered. For example, order 5 pieces = 5 meter uncut.

GE5C Bearing for Voron Trident or the Voron 2.4 GE5C mod.

Gdstime 5015 Blower Fan, very well suited for the Stealthburner. Model Number GDB5015. This is the high speed variant! It is louder and can potentially produce more vibrations than the regular 6000 RPM variant, but it has a higher airflow and can overcome a higher static pressure. Also the startup-time is considerably quicker.   Dual Ball Bearing, 24V, 140mA, 8500 RPM, 5.53 cfm, 48.6dB(a), 1.42 InH2O

CNLinko Connector LP-12 connector, 4 pins

The new and fixed revision of the Voron OptoTap PCB v2.4.1, operates between 5 and 24V. Comes with the Optek OPB666N

2 pieces M3x50 screw in Stainless Steel V2a, fully threaded